市场上吻合各种标准的通俗链条网带，重要供一样平常环境下使用的。若网带经常是在上述一些条件的环境下工作，需适当选用特别材料以达到写意的链条网带寿命是很紧张的。

1、在超过400℃的高温下使用时网带在工作时因为输送物料和环境的热量使温度上升百度搜索排名，输送链条网带强度将随着温度上升而降落。网带使用的限定将取决于物料和链条网带的温度。温度超过400℃的安全系数需咨询制造厂商。关于在高温下使用网带式需考虑得题目有：1）通常摩擦的因素产生较大的热量;2）因为热膨胀系数不同，当不同的材料焊接在一路时有出现热委靡可能；3）当环境超过400℃时零件间热膨胀造成间歇减小应予以考虑；4）蠕变；5）（高温）热脆性；6）碳析出的脆性；7）温度转变的影响（冷却和膨胀）；8）高温对润滑的影响，硅、石墨和二硫化钼润滑油均有优秀的抗热性。当链条网带被暴露在腐蚀物料中使用时造成的不良后果由：网带零件变细。磨损加速，零件上的铁锈会影响网带铰链和滚子天真回转；当网带在酸性或碱性的环境下工作时，零件还会出现应力腐蚀和晶粒腐蚀。选择在腐蚀性环境下使用的网带，必须正视网带零件材料的选择。用马氏体不锈钢系列作零件的链条网带是否生锈还需取决于工作条件。掌握防腐蚀技术对在腐蚀性环境下精确使用网带式有效的。

1, in more than 400 degrees of high temperature use, net belt at work, because the transport of materials and the environment of the heat, the temperature rise, Baidu search ranking, conveyor chain mesh belt strength will rise with the temperature and landing. The limit of the use of the mesh belt will depend on the temperature of the material and the chain mesh belt. The safety factor of temperature above 400 shall be consulted by the manufacturer. On the use of network in high temperature belt should be considered to be the subject of: 1) the friction factors usually produce large quantity of heat; 2) because of the different thermal expansion coefficient, when different welding materials when there is heat fatigue may; 3) when the environment is higher than 400 DEG C parts caused by thermal expansion decreases should be intermittent consider; creep; 4) 5) (high temperature) hot brittleness; 6) carbon deposition in the brittle; 7) effect of temperature change (cooling and expansion); 8) the effects of high temperature on lubrication, silicon, graphite and MoS2 lubricating oil has excellent heat resistance. When the chain mesh belt is exposed to corrosive material, the undesirable results are caused by: the mesh belt parts are thinned. Wear accelerates, and rust on the part affects the belt hinge and the roller. When the mesh belt works in an acid or alkaline environment, stress corrosion and grain corrosion occur. To select the mesh belt used in corrosive environment, the material of the mesh belt parts must be faced squarely. It depends on the working conditions whether the chain mesh belt of the martensitic stainless steel series can be rusted or not. Master corrosion protection techniques and use mesh belts accurately in corrosive environments.

2、在研磨环境下使用时在研磨环境下使用的链条网带，磨损分外紧张，为保证输送链的使用寿命，使用时要细致：1）安装链罩避免网带暴露在研磨性的物料中；2）当网带暴露在研磨物料中时要选择适当的输送机型式；3）尽可能降低链速；4）为削减网带的销轴和套筒组成的铰链的压力，应选择较大规格的链条网带；5）始终用油脂润滑。